Dear Madelyn,
I have a weaving loom with a fitted tie-up and I’m trying to figure out the best way to tie the treadles. I have two t-shirts that I’m thinking about using for the tie-up, but I’m not sure where to start. For example, should I tie the two t-shirts together so that I have one long piece, or should I tie each t-shirt to a separate treadle? I want to make sure that the tie-up is secure and won’t slip off while I’m weaving.
Looking for some guidance here,
Treadling Tangles
How to Tie a Tie
When it comes to tying a tie, there are several ways to do it. One popular knot is called the Windsor knot, which is best suited for a wide collar and a more boxy pattern. Another option is the Pratt knot, which is similar to the Windsor but has a slightly narrower and more angled shape.
To start, drape the tie around your neck with one end longer than the other. Cross the long end over the shorter end and bring it up through the loop between your neck and the tie. Then, bring the long end down and behind the back of the knot, and pull it through the loop again.
(We may receive a commission on purchases made from links)
Once you have the basic knot in place, tighten it by holding the knot and pulling on the narrow end. Adjust the length of the tie by sliding the knot up or down. The tie should fall just above your belt buckle.
When it comes to tying up the treadles on a loom, there is a similar concept. The tie-up is the way the warp threads are secured to the loom, so it’s important to do it in the most secure and efficient way. There are several ways to tie up the treadles, but the most common way is to use a series of knots and hitches to keep everything in place.
For example, you could start by attaching one end of the treadle to the front of the loom, then bring it under and up through the top of the loom. Repeat this process for each treadle, making sure they are evenly spaced and secured. This will ensure that when you use the treadles, the correct warp threads will be raised and lowered.
Whether you’re tying a tie or tying up treadles, the key is to practice and find the method that works best for you. By following the steps and paying attention to detail, you’ll be able to tie a tie or tie up a loom with ease. Happy tying!
If you have any more questions, feel free to ask Madelyn. She’s an expert in all things weaving and can help guide you through the process. Good luck with your tying endeavors!
How to Tie the Four-In-Hand Tie Knot
Tying a tie can be a challenge, but the four-in-hand knot is a classic and easy way to tie your tie in a stylish and unisex way. Whether you’re working in an office or reading a book at home, this knot is always a go-to option.
To tie the four-in-hand knot, follow these steps:
- Start with the wide end of the tie on your right side and the narrow end on your left side, with the seam facing outward.
- Bring the wide end of the tie over the narrow end.
- Pass the wide end of the tie behind the narrow end.
- Bring the wide end of the tie back across the front.
- Pass the wide end of the tie through the loop around your neck.
- Tighten the knot by pulling the wide end down and adjusting it to your desired length.
- Make sure the tie hangs straight and the knot is centered.
The four-in-hand knot is best suited for shirts with a spread or point collar, as it creates a narrow and asymmetrical knot. It is also well-suited for thicker fabrics and wider ties due to its slightly smaller knot size.
Adapting the four-in-hand knot to certain tie-ups in weaving is similar to adapting the half-Windsor knot to certain hitches on boats. They’re both designed to keep things in place. Treadling twills in certain tie-ups, such as when weaving a series of four-sided boxy knots or adapting reading to wind immediately next to a woven-on band of rubber cleats, therefore, the question of tie-up is a similar one. They can’t be woven with rubber, as rubber won’t hold hitches well enough.
Keep in mind that the four-in-hand knot is not as formal as other knots, such as the Windsor or half-Windsor knot. It’s more suited for business casual or casual events. If you need a more formal knot, consider the Windsor or half-Windsor.
Whether you love classic style or prefer a more fitted and modern look, the four-in-hand knot is a versatile option that works well with a variety of collar styles and tie thicknesses. It’s a knot that is easy to tie and offers a subtle and stylish drape. So next time you need to tie your tie, give the four-in-hand knot a try!
 |
 |
| Four-In-Hand Knot | Four-In-Hand Knot Diagram |
How to Tie the Half-Windsor Tie Knot
When it comes to tying a tie knot, the Half-Windsor is a classic choice. It’s a versatile knot that is easy to tie and looks great with most shirt and tie combinations. Here’s a step-by-step guide on how to do it:
- Start by draping the tie around your neck, with the wide end on your right side and the narrow end on your left side. Make sure the wide end is about 12 inches longer than the narrow end.
- Cross the wide end over the narrow end.
- Take the wide end and bring it up and over the narrow end, creating a small loop.
- Bring the wide end through the loop you just created, from behind.
- Pull the wide end all the way through the loop, making sure it is secured tightly.
- Take the wide end and bring it down and behind the narrow end.
- Bring the wide end up and over the front, from right to left.
- Take the wide end and bring it up and through the loop you created in step 6, from behind.
- Pull the wide end all the way through the loop, creating a knot.
- Adjust the knot by holding onto the narrow end and sliding the knot up towards your collar. The knot should be tight and symmetrical.
The Half-Windsor knot is a wider knot compared to others, making it perfect for shirts with a spread or wide collar. It works well with most tie fabrics, but looks especially handsome with twills and thicker materials. Whether you’re going for a more formal or casual look, the Half-Windsor knot is a timeless choice.
How to Tie the Full Windsor Tie Knot
Tying a tie can be a little daunting if you’re not used to it. However, with a little practice, it becomes an easy and quick task. One of the most popular tie knots is the Full Windsor, also known as the Double Windsor. It is a symmetrical and wide knot that gives a professional and classic look. Here is a step-by-step guide on how to tie the Full Windsor tie knot.
- Start by lifting your collar and draping the tie around your neck. The wider end of the tie should hang on your dominant side, and it should be longer than the narrow end.
- Cross the wide end over the narrow end, bringing it up and through the loop between your collar and your tie.
- Bring the wide end back down, passing it behind the narrow end.
- Next, wrap the wide end around the narrow end, bringing it from behind to the front.
- Take the wide end up and through the loop between your collar and your tie again.
- Bring the wide end down and through the knot you have created in the front, making sure the knot is tight and secure.
- Adjust the tie by pulling both ends gently, making sure the knot is centered and the desired length is achieved. The wide end should reach the middle of your belt buckle.
The Full Windsor tie knot works best with thicker fabrics and wider collar shirts. It is a versatile knot that can be worn in both formal and professional settings. It is also a popular choice for weddings and other special occasions. Once you have mastered the Full Windsor knot, you can explore other tie knots such as the Half-Windsor, Shelby, Four-in-Hand, and the classic necktie knot.
So, whether you’re dressing up for a business meeting or attending a formal event, knowing how to tie a tie properly will make you look polished and put together. Don’t be afraid to experiment with different tie patterns and colors to add some personality to your outfit. Remember, practice makes perfect, and soon you’ll be tying your tie with ease!
How to Tie The Shelby Tie Knot
If you’re looking for a stylish and easy way to tie up your treadles, the Shelby tie knot is a great option. This knot is usually used by weavers to tie the shafts of their looms, but it can also be adapted for other tie-ups. The Shelby tie knot is especially useful when you have paired treadles or a certain style of tie-up that makes it difficult to use other types of knots.
To tie the Shelby knot, start by crossing your thread or twill under the first set of treadles and bring it up between the two. Then, take the thread and wrap it around the two treadles, creating a loop. Bring the thread forward and cross it over the loop, making sure to keep it angled towards the front.
Next, wrap the thread around the two treadles and bring it forward again, slipping it through the loop you created earlier. Pull the thread tight to secure the knot.
When doing a Shelby tie knot, it’s important to leave enough thread to tie a slip-knot at the end. This will help ensure that the knot stays secure and doesn’t come undone while you’re treadling.
The Shelby tie knot is a favorite among weavers because it’s easy to tie and untie, and it stays secure. Whether you’re tying up your treadles or looking for a stylish way to tie your t-shirts or fitted shirts, the Shelby knot is a great option.
If you have any questions or need more information, feel free to ask Madelyn. She’s always happy to help!
Ask Madelyn Best Way to Tie Treadles
When it comes to tying treadles on a loom, there are several ways to go about it. One way is to vary the tie-up pattern for different weave structures. For example, if you’re working on a twill pattern, you might want to tie up your treadles in a specific way to achieve the desired effect.
Another option is to use a Shelby system, which involves tying each treadle to a specific number of shafts. This allows for more versatility and allows you to easily switch between different weave structures without having to re-tie each treadle every time.
Some weavers prefer to use a tie-up called a “neck tie-up.” This involves tying the treadles in a triangular pattern, with the ties going across the neck or top of the loom. This method works well for looms where the treadles are angled and fitted along the sides.
If you’re looking for the easiest way to tie your treadles, Madelyn suggests using a simple straight tie-up. This involves tying each treadle in a straight line, with the ties going up and down between the treadles and the shafts.
When tying treadles, it’s important to secure the ties well so that they don’t come loose while you’re working on your weaving project. Madelyn recommends using strong and durable ties, such as small pieces of twill tape or even old t-shirts cut into strips.
For example, you could tie each treadle to a small piece of twill tape, then tie the other end of the twill tape to the corresponding shaft. This will ensure that your ties stay in place and your treadles are secured while you weave.
In terms of the tie-up pattern, it really depends on the weave structure and the pattern you’re working on. Some weavers prefer a more full-on tie-up, where each treadle is tied to a specific number of shafts, while others prefer a simpler pattern with fewer ties.
If you’re having trouble deciding on the best way to tie your treadles, Madelyn suggests thinking about the gathering lines on a sailboat. When the wind isn’t in your favor, you need to put the boats in a boxy pattern so that they can still move forward. Similarly, when you’re weaving, you want to tie your treadles in a way that allows for the most efficient and fluid treadling motion.
In conclusion, there are many ways to tie treadles on a loom, and the best method really depends on the individual weaver and the project at hand. Whether you’re using a Shelby system, a neck tie-up, or a simple straight tie-up, the most important thing is to ensure that your ties are secure and that your treadles are working smoothly to create the desired pattern and weave structure.
